"Multifunctional connectors selection: Analysis of the advantages of PPO solar photovoltaic connectors with 10 square mm inner core"
MC415-1M1FPLN1001The MC4 connector is a standardized unipolar connector with built-in stress relief and interlocking to ensure the safety and reliability of the connection. The connector is made of PPO material, with excellent UV resistance, wear resistance and anti-aging properties, suitable for outdoor environments, and has a service life of up to 25 years. Its conductor material is pure copper, tinned to ensure good electrical conductivity and corrosion resistance. Waterproof rating up to IP68, suitable for harsh outdoor environment. In addition, the MC4 connector is designed to support "plug and play", simplifying the installation process, reducing the risk of incorrect connections and improving installation efficiency. The connector has also passed the ISO certification, in line with ROHS, Reach and other environmental standards, to ensure the environmental protection and safety of the product.
Inner Core:
High current carrying capacity: The 10 sq. mm copper power cord has a high safe current carrying capacity of up to 65 amps. This makes the cable suitable for applications that require higher currents, such as home mainlines or small industrial applications.
Low voltage loss: A thicker wire cross-section can reduce voltage loss and improve power transmission efficiency. This is especially important for long distance or high power applications.
Enhanced mechanical strength: A larger cross-section usually means a thicker conductor, which provides better mechanical strength and durability.
Reduce heat: Because the larger section can provide more heat dissipation area, 10 square millimeters of cable in the case of carrying the same current, compared to the smaller section of the cable, its heat is less, more safe and reliable.
Suitable for a variety of environments: The 10 sq. mm cable is suitable for a variety of installation environments, both indoor and outdoor, as well as some special environments such as high humidity or chemical presence.
Economic benefits: Although the initial investment may be high, it can save energy costs in the long run due to its efficient power transmission capacity and low operating losses.
How to use:
Preparation: Make sure connectors and cables are in good condition and not damaged or worn.
Cable preparation: Peel the cable to an appropriate length to ensure that the conductor is clean and free of oxidation.
Connect the cable: Insert the cable conductor into the connector and ensure that the conductor is in good contact with the connector.
Secure the cable: Use a tool to secure the cable inside the connector to ensure a secure connection.
Connector interconnection: Align the male and female connectors and gently press them until you hear a click.
Check the connection: Check whether the connector is properly connected to ensure that the connection is firm and not loose.
You can also contact us directly in the following ways: visit, telephone, email
telephone
Contact US