The rated voltage and rated current of the photovoltaic connector must meet the requirements of photovoltaic modules and other electrical equipment.
1.MC410-1M1FPSNXX01Photovoltaic connectors must have high temperature resistance, low temperature resistance, ultraviolet resistance, waterproof and other characteristics to meet the requirements of the outdoor environment.
2. The photovoltaic connector must have good pluggable performance and stable connection quality to ensure the stability and safety of the solar power generation system.
3. A high-quality photovoltaic connector should be able to maintain the life of the solar photovoltaic system (about 20 years).
Photovoltaic connector is a photovoltaic power generation system components, bus box, controller and inverter, etc, between the various components, the key parts of each other, a photovoltaic power station there are 600-1000 connectors.
A good connector must do the following three things:
1. Good conduction, contact resistance shall not be greater than 0.35 milliohm.
2. It is safe enough to have waterproof, anti-high temperature, anti-corrosion, high insulation and other properties, and the protection level should reach IP68.
3. The structure should be reliable, the correct insertion of the male and female connectors, the connection between the two should not be less than 50N, corresponding to the mc4 connector connected to the 4mm² cable, carrying 30-50A current, the working temperature of 90 degrees.
You can also contact us directly in the following ways: visit, telephone, email
telephone
Contact US